Cabinet Sides (both base and upper): label the top, front edge

Cabinet Tops (both base and upper): label the outside face – the raw side on one sided UV plywood – towards front edge

Base Cabinet Bottoms: label outside face – the raw side on one sided UV plywood – towards front edge

Finished Upper Cabinet Bottoms:  label the space behind the .25" groove for back

Nailers (both base and upper): label front edge of side facing down during cut – raw side on one sided UV plywood or the side opposite of pre-drilled holes on melamine.

Stretchers: label front edge of side facing down during cut – raw side on one sided UV plywood 

Doors: label inside hinge hole

Sub Fronts: label the top edge (the other edge is edge-banded)

Drawer Fronts:  label between drawer front adjuster holes, with arrow pointing to top if grain match